 |
DUMMY METER JUMPER
For use when performing heat rise specification as described in ANSI C.12-1 2001 section 4.7.2.9.1 |
 |
EK DISCONNECT DEVICE
Used to make or break load in a lever bypass meter socket. Manufacturers state that load should never be picked up or dropped with the lever bypass. Now there is a solution!! |
 |
HIGH TENSION HORN BYPASS CABLES
Used on a self contained service, to temporarily supply power to a service when a meter is not in place. Used in exchanges, so customer has no outage. |
 |
LINE/NEUTRAL TESTER
Ekstrom’s Line/Neutral Tester easily locates loose, open or faulty connections to line and neutrals. |
 |
METER WARM-UP BOARDS
Meter Devices Company designs and manufactures a complete line of safe and dependable warm-up boards. |
 |
MOBILE WARM-UP STANDS
Safe and easy way to demonstrate, warm up, or program electronic meters in the field or office settings. |
 |
NEUTRAL TESTER
Brooks Ekstrom’s Neutral Testers offer an effective, immediate way to detect and locate loose, open or otherwise faulty neutrals. |
 |
PORTABLE METER SOCKET JAW TESTER
Tool designed to test the tension of meter socket jaws in the field to ensure the jaws are putting proper pressure on the meter blades.
|
 |
PORTABLE METER WARM-UP STAND
This single-position, desk-top unit was designed to permit convenient programming and/or warm-up of electronic meters.
|
 |
QUICK-CHECK LOAD DEVICE
Designed for safely applying a load to “non-registration” meters to determine if the disk turns.
|
 |
SINGLE PHASE METER SOCKET TESTER
Designed for safely applying a load to “non-registration” meters to determine if the disk turns. |
 |
TEST EQUIPMENT STORAGE BAG
Test Equipment storage bag prevents test equipment from damage, and scratches, during transportation from the shop to the meter socket.
|
 |
TEST JUMPERS
Numerous applications within the metering industry. |